familias de productos RAWELT




The WP LED Wallpack lighting fixtures are available incoolwhite , has uniform illumination , and are designed for interioror exterior use , using a LED arrangements can overcome 250watts HID light.

  • Aplicaciones:
  • Facades, courtyards, corridors, tunnels, stairs, perimeter of buildings, parking lots, loading dock, and many more industrial and commercial applications.
  • Material:
  • Saline chamber tests to paint according to ASTM B117
  • Paint adhesion tests ASTM D4541-02
  • Diecast aluminum.
  • Finish: electrotastic powder coating epoxic / polyester minimum thickness 2 mils.
  • Heat resistant polycarbonate lens.
  • Stainless steel screws.
  • Gasket: Silicone.
  • T3C temperature range for safe use in most hazardous environments.
  • Resistance to mechanical impacts in IK09 casing, thanks o its design that does not have elements susceptible breakage.
  • Not for use in dwelings, when supply wire exceed 90 °C.
  • Suitable for wet and damp locations when downlight only.
  • Recomended silicon gasket for NEMA 4, 4X and silicone compound in plugs.
  • Characteristics:
  • Minimal maintenance.
  • Instant ignition.
  • Operation at low temperatures.
  • Low surface temperatures.
  • Controller with internal fuses for branch circuit protection.
  • LED system can save up to 80% in energy costs.
  • 50,000 hours of life can provide more than 10 years of lighting without maintenance.
  • Contains no mercury and hazardous chemical products.
  • Operation temperatures: -30 °C a 50 °C.
  • Initial lumens ±5% @ 25°C
  • Grounded housing.
  • Robust and light luminaire design with passive thermal dissipation system thanks to its stylish dissipating blades to keep internal elextronic elements at a suitable operating temperature.
  • Protection against current variations by overvoltage suppressor category C3 10 KV line-ground
  • Polycarbonate globe:
  • Clear and transparent lens, like glass.
  • high heat resistance.
  • flamability classification up to UL 94 V-0/1.2 mm ó UL 94-5VA/3.0 mm 2600F1, 94HB, F1
  • High physical toughness against impacts and scratching.
  • Dimensional accuracy and stability.
  • Dielectric strengh 32-35 kv/mm (1 mm wall thickness).
  • Keeps its physical and chemical properties in a range of -40°C hasta 120°C.
  • Energy savings.
  • Compliances:
    • UL 1598
    • CSA C22.2 No.250
    • UL 8750 LED
  • Catalog Code W LM °K Unit. Pkg. Pcs.
    WP-1-LED 27.50.5348 52 6000 5000 1
    Contact Us

    * Fields requiered

    The use of this form is subject to our Privacy Policy

    I have read and accept the terms and conditions set by the company in its Privacy Notice in accordance with the Federal Law on Protection of Personal Data Held by Private Parties.

    871 747 47 47
    800 7117 200
    Calz. Ávila Camacho No. 1510
    27020 Torreón, Coah., México.
    Online Quote Validation

    To verify the authenticity and validity of our contributions, we invite you to visit the following link: