HID INDUSTRIAL LIGHTING FIXTURE FOR ORDINARY AND HAZARDOUS LOCATIONS
MH. METAL HALIDE LIGHTING FIXTURE.
(HIGH POWER FACTOR BALLAST MIN. P.F. 90 %)
LH SERIES
- Class I Div. 2/Groups A,B,C,D. Class II Div. 1 Groups E,F,G.
Class I Zone 2/Groups II C, II B, II A.
- Class I Div. 2/Groups A,B,C,D. Class II Div. 1 Groups E,F,G.
APPLICATIONS:
- Series LH, HID Lighting fixtures (High Intensity Discharge) are designed for use with high pressure sodium, and metal halide lamps, where moisture, dust, dirt, corrosion and vibration may be present or where exist the possibility of water, wind or snow.
- They can be use in ordinary location and in hazardous locations in the presence of flammable vapors, gases or combustible dust as defined by NEC (National Electrical Code).
- Lighting fixtures could be use in manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, offshore installations, warehouse, etc.
- Designed lamp mounted base up position.
- Easy access to the electrical components by hinged ballast housing
MATERIALS:
- Body and mounting: Diecast aluminum.
- Finish: Electrostatic powder epoxic/polyester polymerized. Minimum thickness 2 mils.
- Saline chamber test to paint according to ASTM B117.
- Paint adhesion test according to ASTM 3359.
- Resistance to mechanical impacts according to IK09 body, thanks to its design that does not have elements susceptible to breakage.
- For use indoor and outdoor.
- External hardware: Stainless steel.
- Refractor globe: Threaded heat resistant prismatic crystal
CHARACTERISTICS:
- 6 Mounting types: Pendant, stanchion 25° and straight 90°, ceiling, wall and remote ballast.
- Ballast: High power factor, class H insulation (180 °C)
- Power rating:
- High pressure sodium: 70, 100, 150 w
- Metal halide: 175, 250 w
- Incandescent: 60 through 300 w
- Electrical protection: Ground screw to bond mounting cover to ballast housing.
- Operation temperature:
- -30 °C up to 50 °C
- Minimum operation temperature:
- -40 °C (-40 °F) High pressure sodium vapor,
- -30 °C (-22 °F) Metal halide
- Lampholder: Mogul base for high temperatures in HID, and Medium Base in incandescent. LED flourescent and Halogen.
- Gaskets: Silicone for high temperatures.
- Guard: Diecast aluminum
- Lamp not furnished. Accepts maximum length lamp of 210 mm (8.26″)
- Reflector: Fiberglass reinforced with white polyester.
- Add to the catalog the suffix to specify the voltage:
- 127, 220 Dualvolt: DT
- 127, 208, 240, 277, Multitap: MT
- Grounded Hosing
- Manufactured in compliance with:
- UL 844, UL 1598
- CSA C22.2 No.137
- NEMA 3,4X
- IESNA – LM – 31
- IESNA – LM – 46