APPLICATIONS:

• • Food processing plants, canneries, dairies, breweries bakeries and emergency lights, low ceiling, and any kind of room.
  • Is recommended to avoid food contamination for particles from broken glasses.

MATERIAL:

• • • – Diecast aluminum.
    • – Heat resistant polycarbonate globe.
    • – Saline chamber test to paint according to ASTM B117
    • – Paint adhesion test according ASTM 3359
    • – Resistance to mechanical impacts according IK09 body, thanks to its design that does not have elements suceptible to breakage.
    • – Stainless steel screws.
    • – Gasket: Silicone.

• • Not for use in dwellings, when supply wire exceed 90 °C.
  • Suitable for wet and damp locations when downlight only .
  • Recomended silicon gasket for NEMA 4,4X, IP65 and silicone compound in plugs.
  • NPT threaded to ensure ground continuity

CHARACTERISTICS:

• • Photometric Distribution: IESNA Type II, Type III and Type HB-90º.
  • Excellent heat dissipation for a long life of LEDS through the design of external flaps.
  • Protection agains current variations through voltage supresor category C3 10 kv line-ground
  • Minimal maintenance.
  • Instant ignition.
  • Operation at low temperatures.
  • Low surface temperatures.
  • LED system can save up to 80% in energy costs.
  • 50,000 hours of life can provide more than 10 years of lighting without maintenance.
  • Contains no mercury and hazardous chemical products.
  • Operation temperatures: -30 °C up to 50 °C.
  • Initial lumens 5% @ 25 °C

POLYCARBONATE GLOBE:

• Clear and transparent globe, like glass.
• High heat resistance.
• Flammability classification up to UL 94 V – 0/1.2 mm or UL 94 – 5 VA/3.0 mm  2600F1, 94HB, F1
• High physical toughness against impacts and scratching.
• Dimensional accuracy and stability.
• Dielectric strengh 32 – 35 kv/mm (1 mm wall thickness).
• Keeps its physical and chemical properties in a range of -40 °C up to 120 °C.
• Grounded housing
• Real performance could vary as a result of application and enviroment where
  the lighting fixture are installed.
  All parameters are designed and measured under laboratory conditions at 25 ºC.
  T5 temperature range for safe use in most hazardous enviroments.
  Factory sealed: Refer to installations instructions for external seal requeriments.

Manufactured in base to:

• • UL 1598, UL 844
    CSA C22.2 No. 250
    UL 8750 LED
    NMX-J-307-2017
    NMX-J-627-2009
    NMX-J-529-2012
    NOM-064-SCFI-2014
    NOM-030-ENER-2016
    NOM-003-SCFI-2014
    NOM-001-SCFI-2018
    NOM-058-SCFI-2017
    NOM-024-SCFI-2013