become distributor

HIGH BAY INDUSTRIAL LIGHTING FIXTURE

ENCLOSED AND GASKETED

HB-LED SERIES

The LED lighting fixtures are available in neutral white have a uniform illumination, and are designed for interior or exterior use, using a LED arrangements can overcome 1000 watts of HID light.

APPLICATIONS:

  • Series HB-LED, lighting fixtures designed for use where moisture,
    dust, dirt, corrosion and vibration may be present or where
    There exists the possibility of water, wind or snow.
  • They can be used in ordinary locations
  • Lighting fixtures could be used in manufacturing plants, warehouse,
    industrial and maneouver yards, storage rooms, high ceilings
    applications, etc.

MATERIAL:

  • Body and mounting: Die cast aluminum.
  • Finish: Electrostatic powder coating epoxy/polyester minimum thickness 2 mils.
  • Saline chamber test to paint according to ASTM B117.
  • Paint adhesion test according to ASTM 3359.
  • Resistance to mechanical impacts according to IK09 body, thanks to its design that does not have elements susceptible to breakage.
  • External hardware: Stainless steel.
  • Optical lens: Prismatic polycarbonate globe impact and high heat
    resistant.
  • Gaskets: Silicone for high temperatures.

CHARACTERISTICS:

  • Photometric Distribution: HB-120º.
  • Minimal maintenance.
  • Instant ignition.
  • Operation at low temperatures.
  • Low surface temperatures.
  • The LED system can save up to 80% in energy costs.
  • 50,000 hours of life can provide more than 10 years of lighting
    without maintenance.
  • Contains no mercury and hazardous chemical products.
  • Operating temperatures: -30 ºC up to 50 ºC
  • Mounting: Pendant
  • Grounded housing
  • Wet locations
  • Raintight
  • Initial lumens ±5% @ 25°C
  • External flaps provide great thermal transfer for long life of LED obtaining higher T-Ratings (if apply)
  • Protection against current variations through voltage suppressor 4 KV line – ground.
  • Real performance could vary as a result of application and environment
    where the lighting fixtures are installed.
    All parameters are designed and measured under laboratory conditions at 25ºC
    T5 temperature range for safe use in most hazardous environments.
    Factory sealed: Refer to installation instructions for external seal requirements.

MANUFACTURED IN BASE TO:

  • UL 1598
    CSA C22.2 No. 250
    UL 8750 LED
    NEMA 3, 3R, 4, 4X
    NMX-J-307-2017
    NMX-J-627-2009
    NMX-J-529-2012
    NOM-003-SCFI-2014
    NOM-001-SCFI-2018
    NOM-064-SCFI-2017
    NOM-030-ENER-2016
    NOM-058-SCFI-2017
    NOM-024-SCFI-2013
Scroll to Top