• Class I Div. 1/Groups C, D class II Div. 1 Groups E, F, G.
      Class I Zone 1/Groups II B, II A. Class II Groups E, F, G.


    • The explosionproof LED lighting fixtures are neutral white and cool white having uniform illumination and are designed for interior or exterior use, using LED arrangements can overcome 1000 w of HID light.


    • Series LE-LED, lighting fixtures are designed for use where moisture, dust, dirt, corrosion and vibration may be present or where exist the possibility of water, wind or snow.
    • They can be use in ordinary location and in hazardous location by the presence of flammable vapors, gases or combustible dust as defined by NEC (National Electric Code).
    • Lighting fixtures could be use in manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, offshore installations, warehouse, etc.


    • Body and mounting: Diecast aluminum.
    • Finish: Electrostatic powder coating epoxic/polyester. Minimum thickness 2 mils.
    • Saline chamber test to paint according to ASTM B117
    • Paint adhesion test according to ASTM 3359
    • Resistance to mechical impacts according to IK09 body, thanks to its design that does not have elements susceptible to breakage.
    • External hardware: Stainless steel.
    • Refractor globe: Tempered cristal impact and high heat resistant.
    • Gaskets: Silicone for high temperatures.
    • Optical lens: Heat resistant crystal.


    • Photometric Distribution: HB-60º, HB-90º, IESNA Type II, Type III and Type V.
    • Minimal maintenance.
    • Instant ignition.
    • Operation at low temperatures.
    • Low surface temperatures.
    • Controller with internal fuses for branch circuit protection.
    • LED system can save up to 80% in energy costs.
    • 50,000 hours of life can provide more than 10 years of lighting without maintenance.
    • Grounded housing
    • Contains no mercury and hazardous chemical products.
    • Operation temperatures: -30 ºC (-22 ºF) up to +50 ºC (122 ºF).
    • 4 Mounting types: Pendant, stanchion 25º, ceiling, wall.
    • Wet locations
    • Raintight
    • Explosionproof
    • Dust-ignition proof
    • Protection against current variations through voltage supressor category C3 10 KV line-ground
    • External flaps provides great therminal transfer for a long life of LED, obtaining higher T-Ratings.


  • Compliances:
  • UL 844  UL 1598 C
  • CSA C22.2 No. 137
  • UL 8750 LED
  • NEMA 3, 3R, 4, 4X.
  • NMX-J-307-2017.
  • NMX-J-627-2009.
  • NMX-J-529-2012.
Scroll to Top