become distributor

HAZARDOUS LOCATIONS INDUSTRIAL LED LIGHTING FIXTURE

ENCLOSED AND GASKETED.

LH-LED SERIES

    • Class I Div. 2/Groups B, C, D Class II Div. 1 Groups E, F, G.
      Class I Zone 2/Groups II B, II B plus hidrogen, II A, Zone 20, 21, 22

The LED lighting fixtures are neutral white and cool white, both has uniform illumination, and are designed for interior or exterior use, using a LED arrangements can overcome 1000 watts of HID light.

APPLICATIONS:

    • Series LH-LED, Lighting fixtures designed for use where moisture, dust, dirt, corrosion and vibration may be present or where exist the possibility of water, wind or snow.
    • Lighting fixtures could be use in manufacturing plants, and certain
      chemical and petrochemical processing facilities, sewage treatment
      plants, offshore installations, warehouse, etc.

MATERIAL:

    • Body and mounting: Diecast aluminum. Robust and heavy duty
    • Finish: electrostatic powder coating polyester polymerized by oven
      minimum thickness 2 mils.
    • Ensure a complete corrosion and UV rays protection grey color
    • Saline chamber test to paint according to ASTM B117
      Paint adhesion test according ASTM 3359
      Resistance to mechanical impacts according IK09 casing, thanks to
      its design that does not have elements susceptible to breakage.
      External hardware: Stainless steel.
      Refractor globe: Polycarbonate resistant to UV.
      Gaskets: Silicone for high temperatures.
      NPT threaded to ensure ground continuity

CHARACTERISTICS:

    • Photometric Distribution: IESNA Type I and Type V.
      External flaps provides great thermal transfer for
      a long life of LED, obtaining higher T-Raitings.
      Minimal maintenance.
      Instant ignition.
      Operation at low temperatures.
      Low surface V.
      LED system can save up to 80% in energy costs.
      50,000 hours of life can provide more than 10 years of lighting
      without maintenance.
      Contains no mercury and hazardous chemical products.
      Operation temperatures: -30 ºC up to 50 ºC.
      Protection agains current variations through voltage supressor
      category C3 10 KV line-ground.
      5 Mounting types: Pendant, stanchion 25º and 90º, ceiling, wall.
      Wet locations.
      Raintight.
      Dust-ignition proof.
      Grounded housing.
      Initial lumens 5% @ 25 ºC
      Real performance could vary as a result of application and enviroment
      where the lighting fixture are installed.
      All parameters are designed and measured under laboratory conditions at 25 ºC
      T5 temperature range for safe use in most hazardous enviroments.
      Factory sealed: Refer to installations instructions for external seal requeriments
    • Robust and light luminaire design with pasive thermal dissipation system
      thanks to its stylish dissipation fins/blades to keep internal electronics
      elements at a suitable operating temperature ensure cooling by natural
      convection air flow.

Manufactured in base to:

  • UL 844 UL 1598
    CSA C22.2 No. 137
    UL 8750 LED
    NEMA 3, 3R, 4, 4X
    NMX-J-307-2017
    NMX-J-627-2009
    NMX-J-529-2012
    NOM-064-SCFI-2014
    NOM-030-ENER-2016
    NOM-003-SCFI-2014
    NOM-001-SCFI-2018
    NOM-058-SCFI-2017
    NOM-024-SCFI-2013
Scroll to Top