• Class I Div. 1/Groups C, D. Class II Div. 1 Groups E, F, G (Max 150W)
      Class I Zone 1/Groups II B, II A, Class II Groups E, F, G (Max 150W)
    • Series LE, Lighting fixtures designed for use where moisture, dust, dirt, corrosion and vibration may be present or where exist the possibility of water, wind or snow.
    • They can be use in ordinary location and in hazardous locations by the presence of flammable vapors, gases or combustible dust as defined by NEC (National Electrical Code)
    • Lighting fixtures could be use in manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, offshore installations, warehouse, etc.
    • Designed lamp mounted base up position.

    • Body and mounting: Die cast aluminum.
    • Finish: Electrostatic powder epoxic/polyester. Minimum thickness 2 mils
    • Saline chamber test to paint according to ASTM B117.
    • Paint adhesion test according ASTM 3359.
    • Resistance to mechical impacts according IK09 casing, thanks to its design that does not have elements susceptible to breakage. External hardware: Stainless steel.
    • External hardware: Stainless steel.
    • Refractor globe: Heat resistant prismatic crystal

  • 4 Mounting types: Pendant, stanchion, ceiling, wall.
  • Operation temperature: -30°C up to +50 °C
  • Lampholder: For high temperatures medium base. For incandescent, fluorescent, LED or Halogen.
  • Accept maximum lamp length of 125 mm (4.92″).
  • Power rating: Up to 300w PS 25 and 100-150 w A-21.
  • Gaskets: Silicone for high temperatures.
  • Guard: Diecast aluminum
  • Lamp not furnished
  • Wet locations
  • Raintight
  • Explosionproof
  • Dust-ignitionproof
  • Grounded housing
  • Comply with:
  • UL 844, UL 1598
  • CSA C22.2 No.137
  • NEMA 3, 3R, 4, 4X
Scroll to Top