EXPLOSIONPROOF INDUSTRIAL LIGHTING FIXTURE.

• Class I Div. 1/Groups C,D class II Div. 1 Groups E,F,G.
  Class I Zone 1/Groups II B, II A. Class II Groups E,F,G.

Applications:

• Series LE-PC, Lighting fixtures designed for use where moisture,
  dust, dirt, corrosion and vibration may be present or where
  exist the possibility of water, wind or snow.
  They can be use in ordinary location and in hazardous locations by
  the presence of flamable vapors, gases or combustible dust as
  defined by NEC. (National Electrical Code)
  Lighting fixtures could be use in manufacturing plants, and certain
  chemical and petrochemical precessing facilities, sewage treatment
  plants, offshore installations, warehouse, etc.
  Designed lamp mounted base up position.

Materials:

• Body and mounting: Die cast aluminum.
  Finish: Exterior pvc coating: 40 mils minimum.
  Exterior purple urethane: 2 mils minimum.
  Saline chamber test according to ASTM B117
  Paint adhesion test according ASTM 3359
  Resistance to mechanicals impacts to body according IK09 casing,
  thanks to its design that does not have elements susceptible tobreakage.
  Pressure sealing sleeves on conduit openings.
  External hardware: Stainless steel.
  Refractor globe: Heat resistant prismatic crystal

Characteristics:

• Mounting types: Pendant, stanchion, ceiling, wall.
  Operation temperature: -30°C up to +50 °C
  Lampholder: For high temperatures medium base. For incandescent,
  flourescent, LED ot Halogen.
  Accept maximum lamp lenght of 125 mm (4.92)
  Power rating: Up to 300w PS 25 and 100-150w A-21.
  Gaskets: Silicone for high temperatures.
  Guard: Die cast aluminum
  Lamp not furnished
  Wet locations
  Raintight
  Explosionproof
  Dust-ignition proof
  Grounded housing
  Factory sealed: Refer to installations instructions for external seal requeriments

Comply with:

• UL 844 UL 1598
  CSA C22.2 No.137
  NEMA 3, 3R, 4, 4X
  NMX-J-307-ANCE-2017
  NMX-J-627-ANCE-2009
  NMX-J-529-ANCE-2012