HIGH BAY INDUSTRIAL LIGHTING FIXTURE
ENCLOSED AND GASKETED
Rawelt’s high bay industrial lighting fixture is designed to provide powerful and uniform illumination in facilities with high ceilings, such as warehouses, factories and commercial spaces.
Its robust construction and high-performance design make it ideal for environments where consistent lighting at elevated heights is essential. The high bay industrial lighting fixture ensures energy efficiency, reduced maintenance needs, and excellent visibility across large indoor areas.
HB-LED SERIES
The LED lighting fixtures are available in neutral white have a uniform illumination, and are designed for interior or exterior use, using a LED arrangements can overcome 1000 watts of HID light.
APPLICATIONS:
- Series HB-LED, lighting fixtures designed for use where moisture,
dust, dirt, corrosion and vibration may be present or where
There exists the possibility of water, wind or snow. - They can be used in ordinary locations
- Lighting fixtures could be used in manufacturing plants, warehouse,
industrial and maneouver yards, storage rooms, high ceilings
applications, etc.
MATERIAL:
- Body and mounting: Die cast aluminum.
- Finish: Electrostatic powder coating epoxy/polyester minimum thickness 2 mils.
- Saline chamber test to paint according to ASTM B117.
- Paint adhesion test according to ASTM 3359.
- Resistance to mechanical impacts according to IK09 body, thanks to its design that does not have elements susceptible to breakage.
- External hardware: Stainless steel.
- Optical lens: Prismatic polycarbonate globe impact and high heat
resistant. - Gaskets: Silicone for high temperatures.
CHARACTERISTICS:
- Photometric Distribution: HB-120º.
- Minimal maintenance.
- Instant ignition.
- Operation at low temperatures.
- Low surface temperatures.
- The LED system can save up to 80% in energy costs.
- 50,000 hours of life can provide more than 10 years of lighting
without maintenance. - Contains no mercury and hazardous chemical products.
- Operating temperatures: -30 ºC up to 50 ºC
- Mounting: Pendant
- Grounded housing
- Wet locations
- Raintight
- Initial lumens ±5% @ 25°C
- External flaps provide great thermal transfer for long life of LED obtaining higher T-Ratings (if apply)
- Protection against current variations through voltage suppressor 4 KV line – ground.
- Real performance could vary as a result of application and environment
where the lighting fixtures are installed.
All parameters are designed and measured under laboratory conditions at 25ºC
T5 temperature range for safe use in most hazardous environments.
Factory sealed: Refer to installation instructions for external seal requirements.
MANUFACTURED IN BASE TO:
